Outboard Pilot Hydraulic-Steer Pack

Part # -000-11748-001

Everything you need in one box to fit an autopilot to your hydraulic-steer outboard motor, the Outboard Pilot lets you focus on any activity while keeping the boat on course. When connected to a GO XSE Series, NSS evo2 or NSO evo2, the Outboard Pilot can steer to a waypoint or along a route, select a turn pattern or simply hold a constant heading.  Easily convert trails to routes – so you can retrace a previous track.  The Simrad Outboard Pilot with Point-1AP Compass + GPS is recommended for single outboard set-ups, on boats that are 30 feet and less, in length.

Key Features

  • Steer your boat to a heading, waypoint, route or cursor, with control from your Simrad GO XSE Series, NSS evo2, NSO evo2 display.
  • “One-touch” route creation from saved trails.
  • Repeat your path with automatic turn patterns.
  • Recommended for single-outboard setups, on boats that are 30 feet and less, in length.
  • VRF (Virtual Rudder Feedback) – simplifies pilot installation -- eliminating the need for a rudder position sensor.
  • Easy setup – straightforward guide steps you through first-time install.
  • Easy-to-install, plug-and-socket connection – with no complex terminal wiring.
  • Supported by Simrad Service and Support program

 *In the box:

  • NAC-1 Autopilot Computer
  • PUMP-1 Hydraulic Pump
  • Point-1AP Compass + GPS Sensor
  • Hydraulic Pump Fitting Kit - Everything you need to connect with your existing hydraulic system – including t-connectors, hoses and oil.
  • Auto/Standby Button - Mounts anywhere on dash and changes Autopilot from STBY to AUTO mode with one press.
  • NMEA 2000® Networking Kit
Where To Buy



    Simrad GO/NSS evo2/NSO evo2 Navigation System Integration

    Designed exclusively for Simrad navigation system control, the Simrad Outboard Pilot Hydraulic Steer autopilot pack does not include or require a dedicated head unit – perfect for smaller vessels with limited helm space. Set a heading, steer to a waypoint, or follow a predefined route, right from your existing touchscreen display – or take control and steer with precision.

    Dash-mount Auto/Standby button

    The Simrad Outboard Pilot Hydraulic Steer autopilot pack includes a remote, dash-mount auto/standby button for installation at the helm. This lets you enable the autopilot with ease, or disable the autopilot and take manual control in an instant.

    Automatic Turn Patterns

    Pre-set turn patterns make manoeuvres such as U-turns simple and fuel efficient, while more complex turn patterns support activities such as fishing, searching for dive sites, or even mapping your favourite lake with Insight Genesis and the built-in sonar or a networked SonarHub sounder module.

    Depth Contour Tracking

    Using real-time depth measurements collected by the navigation system’s built-in sonar or a networked echosounder module, the Simrad Outboard Pilot Hydraulic Steer autopilot pack can steer automatically along a depth contour – perfect for anglers fishing ledges or drop-offs, but also a great way to take a picturesque cruise along the coastline while automatically maintaining a safe depth beneath your boat.

    Super-Quiet 0.8 L Hydraulic Pump

    The Simrad Outboard Pilot Hydraulic Steer autopilot pack includes a highly efficient ‘PUMP-1’ 0.8 litre hydraulic gear pump, suitable to drive hydraulic steering systems on inboard and single or double outboard vessels under 10 m (35 ft). High efficiency, 12V operation is suitable for smaller vessels, while super-quiet operation helps to keep your time on the water as enjoyable as possible.

    Virtual Rudder Feedback

    Simplifying autopilot installation and maintenance, Simrad Virtual Rudder Feedback technology means the NAC-1 does not require the installation of a separate feedback unit to track outboard position on single or dual-outboard vessels.

    Optional Rudder Position Sensor

    On inboard vessels, an RF25N rudder feedback sensor (sold separately) can be used to precisely measure rudder position, providing smooth autopilot operation and a useful indication of rudder angle on your display at the helm. The RF25N includes a 5.5 metre (18 ft) cable with Micro-C connector for easy connection to your boat’s NMEA 2000® network.

    Easy To Install, Everything Included

    This comprehensive kit includes everything required for professional or DIY installation (full list below) on single or dual-outboard vessels. Detailed instructions are provided, and plug-and-play connectors on the NAC-1 Autopilot Computer help make installation quicker and easier than ever.

    Technical/Environmental

    Product Width NAC-1 Product Width: 8.3” (210 mm)
    Product Depth NAC-1 Product Depth: 7.4” (188 mm)
    Product Height NAC-1 Product Height: 2.3” (57.6 mm)

    Power

    Power Supply (Supply Voltage) NAC-1 Power Supply (Supply Voltage): 12v DC
    • NAC-1 Autopilot Computer
    • PUMP-1 0.8L Hydraulic Pump - 0.8L reversible hydraulic pump, compatible with Seastar manual helm pumps up to 14ci.
    • Point-1AP Compass + GPS - provides extremely accurate and rapid boat position update, along with heading for accurate boat direction at any speed.
    • Auto/Standby Button
    • NMEA 2000® Network Kit
      • 4-way block
      • Male & Female Terminators
      • Network Power Cable
      • 0.6m (2ft) Network Cable
      • 1.8m (6ft) Network Cable
    • Pump Fitting Kit
      • 0.75m (2.5ft) Send, Return & Reservoir Hoses
      • Right Angle Adapters
      • Straight-through Adapter
      • T-Adapters (2)
      • Hydraulic Oil (0.5 litres)