NAC™ -D

SKU: 000-15621-001

NAC™ -D is a digital steering autopilot solution for Electronic Vessel Control Systems (steering systems with a digital interface). It allows automatic switching between two speed profiles, delivering optimal steering performance at both low and high speeds. It comes with Continuum® steering and the new SteadySteer™ feature.
View Key Features View Specifications
Find a dealer

Product details

NAC™ -D is a steer-by-wire autopilot solution for Electronic Vessel Control Systems (steering systems with a digital interface).

With NAC -D, boaters with SeaStar® Optimus®, Yanmar® VC10/JC10, Volvo® IPS/EVC or Yamaha® helm master/single engine control systems can benefit from all the full features and performance of Simrad® autopilots.

Easy to install
Requires only the connection of two Micro-C connectors – there is no requirement for an additional hydraulic pump, rudder sensor installation or dockside rudder calibration. This saves boaters’ time and money.

Automatic switching
Featuring Continuum® steering and support for the new SteadySteer™, the NAC -D allows automatic switching between two speed profiles delivering optimal steering performance at both low and high speeds.

Flexible choice
Choose the controller to suit your preference from dedicated controllers like the AP™ 44 or AP 48.

Simrad® autopilot systems incorporate state-of-the-art electronics and represent over 70 years of experience and development. Simrad® autopilots can reduce your workload and fatigue and improve your situational awareness and safety, helping you arrive fresher at your destination.

*Steer-by-wire - digital steering, the steering signal between autopilot and actuator/pump/rudder is in the form of a digital communication protocol.

**Continuum steering - an autopilot algorithm technology based on decades of development, distilling countless hours of real world on-water experience into a system you can trust to take the helm.

***SteadySteer - an autopilot functionality allowing boaters to take immediate, manual control of the vessel through turns without having to disengage the autopilot.

Key Features

  • SeaStar Solutions®, Volvo®, Yanmar® and Yamaha® approved control system interface
  • Control via AP™ 44, AP 48
  • No need for an additional hydraulic pump, rudder sensor, or dockside calibration
  • SteadySteer™ feature included
  • Steer to a waypoint, heading or set turn pattern, such as a U turn, Spiral turn and many more – the NAC™ -D can even initiate a zigzag turn
  • CAN-bus data connectivity - connection to Optimus® steering systems via the CAN-bus data network

What's in the box?

  • N2K-T-RD Network T-Connector

Specifications

Display
Backlight Color
n/a
Display Resolution
n/a
Screen Brightness
n/a
Viewing Angles
n/a
Physical
Compass Safe
0,5m (19,7")
Dimensions W x H x D
86,5 x 20,0 x 11,5mm (3,4 x 0,8 x 0,45")
Mounting Type
Inline with cable
Weight
0,1kg (0,2 lbs)
Electrical
Power Consumption max
40mA
Power Consumption typical
40mA
Recommended Fuse Rating
n/a
Supply Voltage
9-16V via CAN
Environment
Operating Temperature Range
0C to +55C (+32F to +131F)
Storage Temperature Range
-30C to +70C (-22F to +131F)
Waterproofrating
IP44
Connectivity
Bluetooth
n/a
Connectivity Wi Fi
n/a
NMEA 0183 Sentences supported
n/a
NMEA 2000 Connectivity
2 x NME2000 Micro-C port, 2 LEN
PC Connectivity
n/a
Autopilot
Compasssensor support
NMEA 2000
Drive Max Boat Length
n/a
Drive Max Stroke
n/a
Drive output
EVC
Engine Drive systems integration
Volvo EVC, Yamaha, Yanmar, Optimus
Manouevres Turn Patterns
C-turn, U-turn, Zigzag turn, Square turn, S-turn, Depth counter tracking (DCT)
Steering Modes
n/a
Approvals
Approvals Compliance
n/a
Other
Interface
n/a
Languages
n/a
Warranty Period
2 years