Skip to content

ForwardScan Sleeve and Plug

SKU: 000-11669-001

This stainless steel sleeve with self-closing valve enables easy on-water installation of a standard ForwardScan transducer, and can be pre-installed by boat builders to make new vessels ForwardScan ready through a simple DIY on-water upgrade.
$199.00

This product is not currently available to purchase online

Product details

ForwardScan suits almost any vessel and hull type, with a stainless steel through-hull mounting sleeve. The sleeve and an optional fairing block can accommodate up to 29 mm (1.15 inch) thick hulls at 12 degrees deadrise, or up to 19 mm (3/4 inch) thick hulls at 20 degrees. A built-in self-closing valve means the ForwardScan transducer can be inserted and removed from the sleeve while on the water, simplifying transducer installation and maintenance. By pre-installing the ForwardScan sleeve and fitting the included watertight blanking plug, boat builders can make a new vessel ForwardScan-ready and allow the transducer to be added later as a DIY on-water upgrade.

Minimum product requirements

Requires a standard ForwardScan transducer to create a complete ForwardScan system. May require a fairing block for installation. This sleeve is not compatible with the ForwardScan Long Stem transducer, blanking plug, or fairing block.

Key Features

  • Stainless steel sleeve for the standard ForwardScan transducer
  • Suits hulls up to 29 mm (1.15 inches) thick
  • Self-closing valve allows on-water transducer removal
  • Includes blanking plug