HALO 2000
|
HALO 3000
|
|
Range |
Min: 6nm Max: 72nm |
Min: 6nm Max: 96nm |
Power Output |
50 watts | 130 watts |
Array Sizes |
3" 4" |
3" 4" 6" |
Array Dimensions |
 |
|
Radar Modes |
Harbour Offshore Weather Bird |
Harbour Offshore Weather Bird Bird+ |
Waterproofing |
Rated as IPX6 for waterproofing | |
Technology |
Pulse compression | |
Compliance |
FCC, Part 47 CFR 80 and 90: RED, Article 3 of Directive 99/5/EC: CE: EN, EN302-248 V2.1.1: Industry Canada, RSS238: RCM (C-Tick): IEC60945 Sec 9.2,9.3, 10.3-10.9, 11.2: IEC60950 Electrical Safety | |
Environmental |
Operating temperature: -25°C to +55°C (-13°F to +131°F) Relative humidity: IEC60945 Exposed product Vibration: IEC60945 Exposed product UV: IEC60945 Exposed product Waterproofing: IPX6 for the pedestal and antenna, IPX5 for the RI-50 interface module Relative wind velocity: HALO 2000 and HALO 3000 radars with 3 ft, 4 ft or 6 ft antenna have a wind rating of 80 knots at 48 rpm in both 24V and 12V systems. |
|
Power Consumption |
235 W (peak, 12V) at maximum wind velocity 380 W (peak, 24V) at maximum wind velocity 45-60 W (average) at zero wind velocity 11 W (average) in standby mode Refers to RI-50 input terminals |
250 W (peak, 12V) at maximum wind velocity 395 W (peak, 24V) at maximum wind velocity 45-75 W (average) at zero wind velocity 11 W (average) in standby mode Refers to RI-50 input terminals |
DC input |
Radar system input 12 OR 24 V DC into the RI-50 12 V Systems 10.8 - 15 V DC 24 V Systems 20 - 31.2 V DC Pedestal voltage input is 50 V DC nominal generated by RI-50 |
|
Power up time |
30-40 seconds from POWER OFF to TRANSMIT | |
Physical |
Height: 429 mm (16.88”) with antenna mounte Antenna swing circle diameter: 3 ft model: 3.75 ft / 1142 mm / 44.96” 4 ft model: 4.73 ft / 1443 mm / 56.81” 6 ft model: 6.72 ft / 2047 mm / 80.59" Component weights Pedestal: 20.3 Kg (44.8lb) Antenna 3 ft: 4.1 Kg (9.0 lb) Antenna 4 ft: 4.9 Kg (10.8 lb) Antenna 6 ft: 6.5 Kg (14.3 lb) RI-50: 1.6 Kg (3.5 lb) 10 m (33 ft) cable: 1.6 Kg (3.5 lb) 20 m (66 ft) cable: 3.2 Kg (7.1 lb) 30 m (100 ft) cable: 4.7 Kg (10.4 lb) |
|
Antenna |
Rotation speed: 16 to 48 rpm depending on operating mode. Beam width: 3 ft model: 2.4°+/-10% (-3 dB width) – 1.7° with Beam sharpening mode on 4 ft model: 1.8°+/-10% (-3 dB width) – 1.3° with Beam sharpening mode on 6 ft model: 1.2°+/-10% (-3 dB width) – 0.8° with Beam sharpening mode on Beam width vertical: 25° +/-10 % (-3 dB width) Plane of polarization: Horizontal polarization |
|
Communication ports |
Ethernet 10/100 Base-T RJ-45 for radar data and control | |
Transmit synchronization |
RS-422 output | |
Remote power on |
Yes | |
Antenna park hold |
Yes (while radar is unpowered) | |
Motor |
Brushless with solid state commutation with electromagnetic braking for parking. | |
Interconnecting cable |
Available in 10 m (33 ft), 20 m (66 ft), 30 m (100 ft) lengths. 20 m (66 ft) length cable included with unit. Options for cable to exit from rear of pedestal or pole mount. 3G/4G or HALO 3/4/6 SERIES interconnection cables can be used with the HALO 2000 SERIES only. |
|
